FEATURED SMB 802.11AC WLAN AP Stack
Basic Features
-
Fully Compliant with IEEE 802.11 a/b/g/n/ac standards
-
Supports Linux-4.x Kernel Version
-
Supports AP, WDS and STA modes
-
Supports built in sniffer/monitor mode
-
Small foot print solution
-
OpenWRT based
-
Rebranding of UI to customer requirement
-
Stable and stress tested stack
Security Features
​
-
Fully compliant with IEEE 802.11i std with support for WPA/WPA2 with either personal shared key (PSK) or Enterprise security (EAP) mode
-
Supports WPA Key-Management with TKIP encryption
-
Supports WPA2 Key-Management with AES encryption
-
EAP (802.1x RADIUS Server) Authentication with following EAP methods
-
EAP-TLS
-
EAP-TTLS
-
EAP-FAST
-
PEAP (MSChapv2, GTC, TLS)
-
LEAP
-
-
WEP Encryption support for 64/128/152 bit modes with Open/Shared Key Authentication modes
Advanced Features
​
-
IEEE 802.11h compliance & fully conforms to various regulatory requirements for DFS (Dynamic Frequency Selection)
-
Support for 802.11k - Radio Resource Measurement (RRM) Standard
-
Support for 802.11r - Fast BSS Transition (FT) standard for Fast Roaming
-
Support for 802.11v - Wireless Network Management (WNM) standard
-
Transmit Power Control (TPC) following regulatory-constraints on Tx-Power in 5Ghz Spectrum
-
Conforms to IEEE 802.11e QoS Stations requirements with the exception of Admission-Control and HCF Functions.
-
Supports WMM certification as specified by WiFi Alliance
-
Supports WPS (WiFi Protected Setup), as specified by WiFi Alliance
-
Access Control List (ACL): Supports for allow/deny of AP services, for particular MAC-addresses
Prowess Proprietary Enhancements
​​
-
Reliable Wireless broadcast and multicast improvements
-
Supports for WiFi Channel load measurement
-
Improved Auto Channel Selection (IACS) for AP mode
-
mBSSID (Multiple BSSID)
-
WDS Mode, with which it provides a client that can be used as a bridge between LAN and standard AP
-
Spectral Analysis – Provides a mechanism for retrieving spectral sample data from radio/baseband, which can be processed to determine the non-WiFi interference sources. Following spectral scan classifiers are currently supported in Prowess solution.
-
Bluetooth
-
Cordless Phone in 2.4 and 5.0Ghz
-
Microwave Oven
-
-
Proprietary 802.11 AP power save algorithm - Provides power utilization reduction, when there are no STAs connected and waiting for connection
-
Station Ageing – support for eliminating non-responsive STAs
-
VoWiFi -- Enhancements for voice and video transmissions through the AP
-
Linux based AP with small memory foot print
-
Supports aggregation extensions for improved throughput
Certifications
-
802.11n Wi-Fi Certification
-
802.111ac Wi-Fi Certification
-
802.11 WMM-AC certification
-
Voice Enterprise Certification (802.11k/11v/11r)
-
WPS Certification
​
​
​
Please see our blog post on spectral scan feature.
​